Installing our beam is easy! ONLY 4 STEPS!

Step 1

Measure Ceiling for Placement
- Measure the ceiling for placement the beams and use the markings on the ceiling to draw a guide line for the center line of each beam.

Step 2

Beam Support
- Cut wood blocks for beam supports to match the inside width of the beam, and drill a hole into the center portion of each block with a 1/4” drill bit.

Step 3

Attach Block to Ceiling
- Measure for placement of blocks on the ceiling. Use a stud detector to ensure that there are no joists where the block and toggle bolts are to be mounted.
-Hold each block to the ceiling, center it on the guide line and dimple for position of the toggle bolt. Using a screw driver inserted into the 1/4” hole in the block to dimple the ceiling. A 5 /8” hole is needed for the toggle bolt.
-Insert toggle bolt into the block and attach block to the ceiling.
-Apply adhesive to block where beam will be attached

Step 4

Attach Beams
Attach beams to blocks with 1 1/2” trim screws, screwed into the sides

Testimonials

What our customers write about our beams and installation process

Thank you so much for everything! It turned out amazing! We are blown away by how easy it was to install. It’s so light weight and easy to work with. And it looks SO REAL! It is truly amazing! 

Terrie from Hamilton, ON

We loved working with Luigi on our custom beams for our kitchen/living room. The product is beautiful and well made. Since using this company we have referred many of our family and friends. Thank you for making this experience nice and easy!

Ben and Cindy

We’d love to hear your feedback! Please take a moment to leave us a Google review and share your experience with LightBeam Design.

Here